INA B -1612 GERMANY Bearing 40 X 68 X 15

C1:560.53 mm; D:60.58 mm; G:37.59 mm; Lockplate:P 96; S3:46.0 mm; Diameter S-3:469.90 mm; L1:63.50 mm; H14:15.3416 mm; Bearing Bore:480 mm; F:75.41 mm;

G:3/8-24UNF; C0:31.8 kN; d:44.45 mm; C:30 mm; SW:4.76 mm; r:2; T max.:100 °C; Weight:1.3 kg; D:100 mm; m:10 mm;

T min.:-20 °C; Dz:95 mm; A2:52.2 mm; Designation of bearing:UC209-28G2; C:31.85 kN; Weight:2.18 kg; L:137 mm; Designation of open end cover:SCOU209-28; Z:56.3 mm; C0:20.8 kN;

D3:240 mm; e:4.2 mm; L1:98.00 mm; Appropriate Hydraulic Nut:HMV40; Lockwasher and Lockplates:MBL40; Weight:7.89 Kg; G:M200x3; Locknut:KML 40; C:31.5 mm; d1:180.00 mm;

Bearing Weight:58.400 Kg; C - Cup Width:63.500 mm; Series:243000; G2 - Heat Generation Factor (Rib-Roller End):726; C1 - Dynamic Radial Rating (1 million revolutions)5:330000 lbf; D:634.873 mm; C0 - Static Radial Rating:822000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:50200 lbf; Cu

A:27 mm; Weight:0.59 kg; B1:30.9 mm; d:25 mm; L:68 mm; C:14 kN; S:7.5 mm; N:12mm; e:16 mm; A1:14 mm;

H:47.6 mm; L:167 mm; C:25.7 kN; L1:54 mm; A1:31 mm; d:31.75 mm; A:48 mm; N1:21 mm; J:127 mm; Designation of housing:P207-;

Characteristic rolling element frequency, BSF:4.07 Hz; d:12 mm; Min operating temperature, Tmin:-25 °C; rs min:0.3 mm; Da max:26 mm; Static load, C0:2.39 kN; Dynamic load, C:5.1 kN; Brand:NTN; ra max:0.3 mm; Radial clearance class:C3;

e:22 mm; L:108 mm; A:38 mm; S:19 mm; J1:72 mm; A2:52.2 mm; C:31.85 kN; L1:90 mm; H:181 mm; Weight:2.06 kg;

N:25mm; J:184 mm; Designation of housing:FS315-; G:M10x1; L:236 mm; d1:113 mm; Recommended tightening torque for set screw:54.5 Nm; B:74.6 mm; e:21 mm; C0:76.8 kN;

C - Cup Width:19.050 mm; D:170 mm; Da - Cup Frontface Backing Diameter:164.59 mm; Y - ISO Factor4:1.31; Series:L724300; C1 - Cup Flange Width:5.000 mm; Cup Part Number:JL724314-B; D1 - Flange Outer Diameter:177.000 mm; K - Factor2:1.27; Design Units:METRIC;

Characteristic inner ring frequency, BPFI:7.84 Hz; dc min:53 mm; Weight / Kilogram:0.503; Dynamic load, C:71 kN; Nlim (grease):8,100 rpm; Manufacturer Name:NTN; Static load, C0:71 kN; Nlim (oil):9,600 rpm; B:21 mm; Da max:72 mm;

da max:91.5 mm; Static load, C0:40 kN; Mass:0.85 kg; rs min:1.1 mm; B:22 mm; Da max:118.5 mm; Max operating temperature, Tmax:110 °C; Nlim (grease):3,100 rpm; ra max:1 mm; Min operating temperature, Tmin:-25 °C;

T min.:-20 °C; B:32.5 mm; d:55.56 mm; L1:104 mm; A2:61.4 mm; d1:74.5 mm; G:M6x1; Weight:2.81 kg; Recommended tightening torque for set screw:16.8 Nm; Designation of housing:FA211-;

d:75.000 mm; Cage Type:Stamped Steel; C - Cup Width:43 mm; Cone Part Number:JN7549; da - Cone Frontface Backing Diameter:0 mm; C0 - Static Radial Rating:479000 N; Ab - Cage-Cone Frontface Clearance:0 mm; Aa - Cage-Cone Backface Clearance:0 mm; Design Units:METRIC; C1 - Dynamic Radial Rating (1 milli